Showing posts with label A. Show all posts
Showing posts with label A. Show all posts

21 May 2015

Cold Cats: Late War German Armour in the Snow

Cold Cats: Tigers and Panthers in the in the Snow

Some WIP photos (Still a fair wack of work to be done on them):


Following on from my post on the Hinterhalt (Ambush) Camo used in the Battle of the Bulge and the Battle for Germany, my thoughts swung to the conflict on the Eastern Front.

My proctrastination box delivered more Panzers in need of the brush. Tigers and Panthers came out.


The Heavy Tigers with their Begleit zug of Medium Panthers move out. 
The Russians have been sighted!

  

Panthers from 3 different 1/72 plastic model producers, and 3 different models (Ausfuhrungs). 
Italeri (L) and centre, Airfix 2nd from left and unknown manufacturer at centre. The Tigers are all from Italeri

I noted the 3 different exhaust configurations on the models, giving a hint that they were from differen production series. (apart from the driver, gun mantlets and commanders hatch configuration differences)

You may also notice that one Panther is slightly smaller - 1/76 I suspect, Airfix's ongoing cardinal sin, selling 1/76 as 1/72 ! It also happens to be the early (Ausf. D model) as used at Kursk. (2nd from left) The central model is an Ausf. A model, and the rest late war Ausf. G models, equipped with flame dampers for night operations, as in the Battle of the Bulge

Unusual picture of a dual exhaust, as seen in A Ausfuhrung (series), with flame dampers. 
Presumably this Panther A survived to late in the war. The series numbers were designated from Ausf. D to A the G, not alphabetically. 

 photo PantherDZimmeritJackBrackets04.jpg

Early (D) model exhaust configuration


Ausf. A configuration


Ausf G without flame dampers


First production flame damper (Large bore curved)


Final production Ausf. G flame dampers (Cylindrical)
This photograph also shows the crew compartment heater which was installed on the last production models.Some late models also carried infra-red sighting gear for night operations


Crew compartment heater attached to air intake on a knocked out Panther. These were not made in the M.A.N factory, but were assembled elsewhere and fitted in the last stages of production. This modification was evident on Panthers in the Ardennes and Wacht am Rhein.



My infantry are all set on autumn bases, some with a light dusting of snow terrain, so they can be used in late summer, autumn, winter or early spring. For a winter game I would need appropriate armour though.

My attention was drawn to one tank in my collection in particular that was a hand-me-down. It was painted in honey-comb grey pattern, almost reminiscent of WW1 disruptive  camo schemes, but less garish. It was based on the early to mid-war dunkelgrau paint schemes, with the occasional dark blue and green bit thrown in. I decided to give the Panzer force a similar look.


You can almost see the snow flying in this snap.



Weathering dust winterisation of a mottled PzKfw V Panther 

I base coated the Tigers and Panthers in German Grey (Dunkel/Panzer Grau) and applied the honeycomb in Rain Grey freehand. I rather liked the look of the end-result, without filling in any of the honeycomb bits. It looked rather like hand-applied white-wash,  hurriedly brushed on in the field (albeit with a little finesse)


88s swing to meet the enemy...

Next I decided to winterise the tanks. Tried two techniques, one being Humbrol's Winter pigment dusted on with a brush, and the other Spraypaint. The latter gave mixed results, mostly due to a malfunctioning, nozzle, leaving me more that just a bit miffed. That would teach me to be too lazy to clean the airbrush. The paint job was almost completely ruined. So a-weatherising, there we go...



Russian medium Tanks T34s await the attack. Obr 41s, 43s and T34-85s



Supported by some Su-76 tank destroyers


Pzkfw Vs in Battle of the Bulge Hinterhalt for comparison

1 August 2013

Pigs Heads and Tank Killers: Saukopfs and StuG IIIs

Of Saukopfs and  StuG IIIs



StuG III F /8 Survivor Belgrade

On the StuG and the pig's head or pig's snout mantlet:



The Stug III began its life as an infantry support vehicle . It went through quite a few changes during its production run .It began its career in the Battle of France and was used right up to the last days of the war. 

 Prototype manufacture was done by Alkett, which produced five prototypes in 1937 on Panzer III Ausf. B chassis. These prototypes featured a mild steel superstructure and Krupp’s short-barreled 75 mm StuK 37 L/24 cannon. Production vehicles with this gun were known as StuG III Ausführung (version) A to E.





The StuGs were organized into battalions (later renamed "brigades" for disinformation purposes) and followed their own specific doctrine. Infantry support using direct-fire was its intended role. Later there was also a strong emphasis on destroying enemy armour whenever encountered.
As the StuG III was designed to fill an infantry close support combat role, early models were fitted with a low-velocity 75 mm StuK 37 L/24 gun(Kurz)  to destroy soft-skin targets and fortifications. After the Germans encountered the Soviet KV-1 and T-34 tanks, the StuG III was first equipped with a high-velocity 75 mm StuK 40 L/43 main gun (Spring 1942) and in Autumn 1942 with the slightly longer 75 mm StuK 40 L/48 gun.(Lang)  These versions were known as the Sturmgeschütz 40 Ausführung F, Ausf. F/8 and Ausf. G.

When the StuG IV entered production in late 1943 and early 1944, the "III" was added to the name to separate it from the Panzer IV-based assault guns. All previous and following models were thereafter known as Sturmgeschütz III.
The Stug G began production in December of 1942 and was used more and more as an anti tank weapon .
The cast mantlet was introduced in production in November 1943 in StuG III Ausf. G production, but StuG IIIs with the bolted "box" mantlet continued in production until the end of the war as production of the cast mantlet was insufficient to cover all of StuG production.  StuG IV production started in December 1943. 
It was used on the StuG III Ausf. G, StuG IV and StuH. from November 1943 to the end of the war. 
The saukopf mantlet began to appear in November of 1943,but never completely replaced the welded mantlet which was seen till the end of the conflict just because of the production requirements. The official  name for this new mantlet was Topfblende,but was commonly know as the saukopf by the crews, as it resembled a pig's head or snout.


So the answer to the question: "Which model of the Stug used the Saukopf mantllet?
The cast gun mantlet was used on 
  • all StuG IV (12.43-04.45) 
  • StuG III Ausf G (Alkett) from 10.43-04.45 (=end) 
  • StuH III Ausf G (Alkett) from 10.43-09.44 

but never on StuG III from Miag. So that is the reason the bolted mantlet was used up to the end of the war 


While the StuG III was considered self-propelled artillery it was not initially clear which arm of the Wehrmacht would handle the new weapon. The Panzer arm, the natural user of tracked fighting vehicles, had no resources to spare for the formation of StuG units, and neither did the infantry branch. It was agreed, after a discussion, it would best be employed as part of the artillery arm.

Beginning with the StuG III Ausf. G, a 7.92 mm MG34 could be mounted on a shield on top of the superstructure for added anti-infantry protection from December 1942. Some of the F/8 models were retrofitted with a shield as well. Many of the later StuG III Ausf. G models were equipped with an additional coaxial 7.92 mm MG34.



The vehicles of the Sturmgeschütz series were cheaper and faster to build than contemporary German tanks; at 82,500 RM, a StuG III Ausf G was cheaper than a Panzer III Ausf. M, which cost 103,163 RM. This was due to the omission of the turret, which greatly simplified manufacture and allowed the chassis to carry a larger gun than it could otherwise. By the end of the war, ~11,300 StuG IIIs and StuH 42s had been built

Overall, Sturmgeschütz series assault guns proved very successful and served on all fronts as assault guns and tank destroyers. Although Tigers and Panthers have earned a greater notoriety, assault guns collectively destroyed more tanks. Because of their low silhouette, StuG IIIs were easy to camouflage and a difficult target. Sturmgeschütz crews were considered to be the elite of the artillery units. Sturmgeschütz units claimed to have knocked out 20,000 tanks by 1944. As of April 10, 1945, there were 1,053 StuG IIIs and 277 StuH 42s in service.

The StuG assault guns were cost-effective compared to the heavier German tanks, though in the anti-tank role they were best used defensively, as the lack of a traversable turret was a severe disadvantage in the assault role. As the German military situation deteriorated later in the war, more StuG guns were built compared to tanks, to replace losses and bolster defenses against the encroaching Allied forces.

Variants

Production numbers from Panzer Tracts 23

StuG III prototypes (1937, 5 produced on Panzer III Ausf. B chassis): By December 1937 two vehicles were in service with Panzer Regiment 1 in Erfurt. Vehicles had eight road wheels per side with 360-millimetre (14 in) wide tracks, 14.5 mm thick soft steel superstructure and the 7.5 cm StuK 37 L/24 gun. Although not suitable for combat, they were used for training purposes as late as 1941.



StuG III Ausf. A (Sd.Kfz. 142; January 1940-May 1940, 30+6 produced by Daimler-Benz): First used in the Battle of France, the StuG III Ausf. A used a modified 5./ZW chassis (Panzer III Ausf. F) with front armor strengthened to 50 mm. The last six vehicles were built on chassis diverted from Panzer III Ausf. G production.



StuG III Ausf. B: (Sd.Kfz 142; June 1940-May 1941, 300 produced by Alkett) Widened tracks (380 mm). Two Rubber tires on each roadwheel were accordingly widened from 520x79mm to 520x95mm each. Both types of roadwheels were interchangeable. The troublesome 10-speed transmission was changed to a 6-speed one. The forwardmost return rollers were re-positioned further forward, reducing the vertical movements of the tracks before they were fed to the forward drive sprocket, and so reduced the chance of tracks being thrown. In the middle of production of the Ausf. B model, the original drive sprocket with eight round holes was changed to a new cast drive sprocket with six pie slice-shaped slots. This new drive wheel could take either 380 mm tracks or 400 mm wide tracks. 380mm tracks were not exclusive to new drive wheels. Vehicle number 90111 shows older drive wheel with wider 380mm tracks.



StuG III Ausf. C: (Sd.Kfz 142; April 1941, 50 produced) Gunner's forward view port above driver's visor was a shot trap and thus eliminated; instead, superstructure top was given an opening for gunner's periscope. Idler wheel was redesigned.

StuG III Ausf. D: (Sd.Kfz 142; May–September 1941, 150 produced) Simply a contract extension on Ausf. C. On-board intercom installed, otherwise identical to Ausf. C.



StuG III Ausf. E: (Sd.Kfz 142; September 1941-February 1942, 284 produced) Superstructure sides added extended rectangular armored boxes for radio equipment. Increased space allowed room for six additional rounds of ammunition for the main gun (giving a maximum of 50) plus a machine gun. One MG 34 and 7 drum-type magazines were carried in the right rear side of the fighting compartment to protect the vehicle from enemy infantry. Vehicle commanders were officially provided with SF14Z stereoscopic scissor periscopes. Stereoscopic scissor type periscopes for artillery spotters may have been used by vehicle commanders from the start.



StuG III Ausf. F: (Sd.Kfz 142/1; March–September 1942, 366 produced) The first real up-gunning of the StuG, this version uses the longer 7.5 cm StuK 40 L/43 gun. Firing armor-piercing Panzergranat-Patrone 39, StuK 40 L/43 could penetrate 91 mm of armor inclined 30 degrees from vertical at 500 m, 82 mm at 1,000 m, 72 mm at 1,500 m, 63 mm at 2,000 m, allowing Ausf. F to engage most Soviet armored vehicles at normal combat ranges. This change marked the StuG as being more of a tank destroyer than an infantry support vehicle. Exhaust fan was added to the rooftop to excavate fumes from spent shells, to enable firing of continuous shots. Additional 30 mm armor plates were welded to the 50 mm frontal armor from June 1942, making frontal armors 80 mm thick. From June 1942, Ausf. F were mounted with approximately 13 inch (334 mm to be exact) longer 7.5 cm StuK 40 L/48 gun. Firing above mentioned ammunition, longer L/48 could penetrate 96 mm, 85 mm, 74 mm, 64 mm respectively (30 degrees from vertical).



StuG III Ausf. F/8: (Sd.Kfz 142/1; September–December 1942, 250 produced) Introduction of an improved hull design similar to that used for the Panzer III Ausf. J / L with increased rear armor. This was 8th version of Panzer III hulls, thus the designation "F/8." This hull has towing hook holes extending from side walls. From October 1942, 30 mm thick plates of additional armor were bolted on to speed up the production line. From F/8, the 7.5 cm StuK 40 L/48 gun was standard until the very last of the Ausf. G. Due to lack of double baffle muzzle brakes, few L/48 guns mounted on F/8 were fitted with single baffle ball type muzzle brake found in Panzer IV Ausf. F2/G.



StuG III Ausf. G (Sd.Kfz. 142/1; December 1942– April 1945, ~8423 produced, 142 built on Panzer III Ausf. M chassis, 173 converted from Panzer III): The final and by far the most common of the StuG series. Upper superstructure was widened: welded boxes on either sides were abandoned. This new superstructure design increased its height to 2160mm. Backside wall of the fighting compartment got straightened, and ventilation fan on top of the superstructure was relocated to the back of fighting compartment. From March 1943, driver's periscope was abandoned. In February 1943 Alkett was joined by MIAG as second manufacturer. From May 1943, side hull skirts (schurzen) were fitted to G models for added armor protection, particularly against Russian anti-tank rifles,it is also useful against hollow-charge ammunition. Side skirts were retro-fitted to some Ausf. F/8 models, as they were be fitted to all front line StuGs and other tanks by June 1943 in preparation for the battle of Kursk. Mountings for side skirts proved inadequate, many were lost in the field. From March 1944, improved mounting was introduced, as a result side skirts are seen more often with late model Ausf G. From May 1943, 80mm thick plates were used for frontal armor instead of two plates of 50mm+30mm. However, backlog of completed 50mm armors exited. For those, 30mm additional armors still had to be welded or bolted on, until October 1943.



A rotating cupola with periscopes was added for the commander for Ausf G. However, from September 1943, lack of ball bearings (resulting from USAAF bombing of Schweinfurt–Regensburg mission) forced cupolas to be welded on. Ball bearings were once again installed from August 1944. Shot deflectors for cupolas were first installed from October 1943 from one factory, to be installed on all StuGs from February 1944. Some vehicles without shot deflectors carried several track pieces wired around the cupola for added protection.
From December 1942, a square machine gun shield for the loader was installed, allowing an MG 34 to be factory installed on a StuG for the first time. F/8 models had machine gun shields retro-fitted from early 1943. The loader's machine gun shield was later replaced by rotating machine gun mount that could be operated by the loader inside the vehicle sighting through a periscope. On April 1944, 27 of them were being field tested on the Eastern front. Favorable report lead to installation of these "remote" machine gun mounts from the summer of 1944.



Later G versions from November 1943, were fitted with the Topfblende pot mantlet (often called Saukopf "Pig's head") gun mantlet without coaxial mount. This cast mantlet with organic shape was more effective at deflecting shots than the original boxy mantlet armor of varying thickness between 45mm and 50mm. Lack of large castings meant that the trapezoid-shape mantlet was also produced until the very end. Coaxial machine gun was added first to boxy mantlets from June 1944, and then to cast Topfblende from October 1944, in the middle of "Topfblende" mantlet production. With an addition of coaxial, all StuGs carried two MG 34 machine guns from fall of 1944. Some previously completed StuGs with boxy mantlet had a coaxial machine gun hole drilled to retrofit a coaxial machine gun, while Topfblende produced from Nov. 1943 - Oct. 1944 without machine gun opening could not be tampered. Also from Nov.1943, all metal return rollers of a few different types were used due to lack of rubber supply. Zimmerit anti-magnetic coating to protect vehicles from magnetic mines were used from September 1943-September 1944 only.



Flammpanzer conversion:

At the beginning of December 1942 an experimental production of a flame-thrower version of the StuG III was begun. Ten test vehicles were constructed in all.

Instead of a main gun an ejection tube with an inside diameter of 14 mm was installed This allowed a flammable mixture to be blown down the barrel by a  pump connected to a two-stroke DKW engine.
The device was able to spew flammable material over a distance of 55 meters.

All the prototypes were sent to the Panzertruppenschule I for testing in June 1943. The Flame-StuG never made it into production and the ten experimental machines were eventually converted back to standard assault guns between January and April 1944. No Flammenwerfer Stug was ever operationally deployed.